Stuck on Arlo WiFi setup? Real fixes for connection issues that actually work

500 5 minutes read

Stuck on Arlo WiFi setup Real fixes for connection issues that actually work

If your Arlo camera not connecting to WiFi is causing you trouble, then you are not alone at all. Stuck on Arlo WiFi setup is one of the common issues you can face when you are setting up or using their Arlo camera. Don’t worry, this is not a serious problem and can be fixed with a few simple steps.

Some common Arlo camera-related issues you may face are Arlo camera offline issues, Arlo not connecting to the internet issues, Arlo camera setup issues, and Arlo camera network connection errors.

You may face these problems due to some small setup mistakes, network issues, or outdated settings.

In this blog, you will get to know everything you need to know so you can easily fix the issue without any stress.

Before going into the depths of fixing, let’s understand the basics first.

Why Stuck on Arlo WiFi setup?

Before jumping into the solutions, knowing why your Arlo camera is not connecting to WiFi and what might be the real causes behind the issue will help you fix the issue much more easily and quickly.

Sometimes the problem with your Arlo camera can be very basic, like a weak signal or a wrong password. Other times, it can be something slightly technical like firmware or compatibility issues.

Here are some of the most common reasons behind Arlo camera not connecting to WiFi:

Low or drained battery.
Incorrect WiFi password.
Camera too far from the router.
Weak or unstable internet.
Network congestion.
Outdated firmware or app.
Camera not in pairing mode.
Using an unsupported 5GHz network.
VPN or firewall interference.
Temporary bugs or glitches.

Understanding these reasons will help you to apply the right fix instead of trying anything randomly.

Step-by-step fixes for Arlo camera WiFi issues

Now, let’s move to the final part, when you actually need to fix your Arlo camera WiFi issues. You need to go through every step one by one and solve the problem without needing any expert help.

Step 1: Check your battery level first

You have to start with the simple thing first. If your camera battery is low, then it will connect properly to WiFi.

You have to make sure that:

The battery is fully charged.
The camera powers on properly.
You can recharge it completely before trying again if needed.

Step 2: Double-check WiFi credentials

This step may sound basic to you, but it is one of the most common reasons behind your Alro camera WiFi issues.

You have to take a moment and follow these steps:

Firstly, you have to re-enter your WiFi name and password.
Then, you have to make sure there are no typing errors.
Lastly, you have to avoid extra spaces or wrong characters in your WiFi credentials.

Because even a small mistake can stop the whole WiFi connection.

Step 3: Ensure the camera is within WiFi range

Your Arlo camera needs a strong signal to connect properly. If your Arlo camera is too far:

Firstly, you have to move it closer to the router.
Then, you have to avoid walls or obstacles in between.
Lastly, try to connect in the same room first.

Once you are connected to the WiFi, you can adjust your placement later.

Step 4: Check your internet connection

Sometimes the issue is not with your camera but with your internet.

To check your internet connection, you have to make sure:

Your WiFi is not working on other devices.
Your internet speed is stable.
Your router is not overloaded.

You can restart your router and try again if needed.

Step 5: Use a 2.4GHz WiFi network

This is a very important step. Most Arlo cameras do not support 5GHz WiFi.

So, you have to:

First, connect to a 2.4 GHz network.
Then, disable 5GHz temporarily if needed.

This step alone will fix the Arlo camera WiFi issue in many cases.

Step 6: Put the camera in pairing mode

Your Arlo camera should be in pairing mode. To put your Arlo camera in pairing mode, you have to follow these simple steps:

First, press the sync or setup button.
Lastly, wait for the LED blinking.

If the LED light is not blinking, then it is not ready to connect.

Step 7: Update your firmware and Arlo app

You should update your firmware and Arlo app because outdated software can create Arlo not connecting to WiFi problem.

You have to make sure:

Your Arlo app is updated.
Your camera firmware is updated.

Step 8: Disable VPN or Firewall if you are using one

Sometimes your security settings can block your WiFi connection with your Arlo camera.

So, you have to:

First, turn off VPN.
Then, disable the firewall temporarily.

Lastly, you have to try connecting your Arlo camera to WiFi.

Step 9: Power cycle your Arlo camera

This is a simple but very effective fix that you can do to connect your Arlo camera to WiFi.

Here are some steps you have to follow to power cycle your Arlo camera:

First, turn off your camera.
Secondly, wait for 20-30 seconds.
Finally, turn the camera back on.

Step 10: Factory reset your Arlo camera

This step should be your last option when none of the above nine steps work for you, as it will clear all your saved data and settings.

Here are the steps you have to follow to factory reset your Arlo camera:

First, you have to press and hold the reset button on Arlo camera.
Then, you have to wait for the LED to blink amber.
Lastly, you have to release and restart the Arlo setup.

Pro tips to avoid WiFi issues in the future

Once your Arlo camera is not working, you will want to keep it working for longer. You have to follow some tips after you fix your Arlo camera not connecting to WiFi issue.

To avoid WiFi issues in the future, you have to:

Always keep your firmware updated.
Always place your Arlo camera within a good signal range.
Always try to avoid overcrowded networks.
Always restart your Arlo devices occasionally.
Always try to use a strong and stable internet connection.

Final thoughts

Fixing your Arlo camera not connecting to WiFi issue is usually not as complicated as it looks. Most of the time, it can be simple things such as signal strength, correct network settings, or minor glitches. If you follow the steps in this blog, you should be able to get your camera back online without needing any professional help.

Frequently asked questions

Q1: Why is my Arlo camera not connecting to WiFi even if I wrote the correct password?

Ans: Your Arlo camera is not connecting to WiFi even if you wrote the correct password because of some common reasons, such as a weak signal or an unsupported 5GHz network band.

Q2: Does my Arlo camera support a 5GHz WiFi network?

Ans: No, most of the Arlo cameras only support 5GHz WiFi networks.

Q3: How do I reset my Arlo camera WiFi connection?

Ans: You can reset your Arlop camera WiFi connection by holding the reset button until the LED light starts blinking.

Q4: Can poor internet speed cause Arlo connection issues?

Ans: Yes, poor internet speed can cause Arlo connection issues by preventing your camera from connecting or staying online.

Q5: How far should I keep my Arlo camera from WiFi router?

Ans: You should keep your Arlo camera within 10-30 feet with minimal obstacles from the WiFi router.