How to Reset Orbi router?

Are you feeling frustrated due to unwanted issues with your Orbi router? You need not to worry at all! Here in this blog post, we have mentioned every detail that is required to enable you to reset Orbi router. 

What are you waiting for?

Let’s delve into the key details mentioned below.

Reasons to Reset Your Orbi Router

There are several factors that cause you issues with your Orbi router. These reasons are –

• To resolve issues such as – slow internet speeds, dropped connections, or inability of the devices to connect
• Be perfect in fixing errors such as – incorrect settings or failed updates
• To clear potential threats or unauthorized access
• For restoring the router to its default state in case it is misconfigured
• To attain permission to reconfigure your router with a new password

Step-By-Step Process To Reset Orbi Router

Here is a list of the detailed procedures for resetting your Orbi router. Let’s have an all-seeing eye on this section

1. Initial Preparation

At the beginning of the reset procedure, you need to make sure that your Orbi router is already powered on. You also need to verify that your device is connected to a stable power source. Next, place it in a location that is too easy for you to access. This way, you can see all the status lights clearly.

2. Identify the Reset Button

In the next step, locate the small reset button. Usually, it is located on the back or bottom of the router. Often, this button is recessed in a pinhole. It is helpful in preventing accidental pressing. Typically, it is labeled “Reset” or depicted with a small icon.

3. Accessing the Reset Button

After that, you have to utilize a paperclip, pin, or a similar pointed tool. It is helpful to you to press the reset button. You need to be completely gentle while you are inserting the tool. This way, you can achieve success by avoiding destroying the router. 

4. Performing the Reset

• Soft Reset (Reboot): If you want to reboot your device without a full reset, hold the button for around 5 seconds. You have to do it until the power light blinks. Later on, you can release it. Now, your router will restart. It will be helpful to you to clear minor connection glitches while keeping your custom settings intact.
• Factory Reset: For a complete reset, you have to press and hold the reset button for around 10-15 seconds. This way, you can erase all personalized settings. You can continue holding until its power light starts blinking. It indicates the router is resetting to factory defaults.

5. Wait for Reboot Completion

Once you release the Reset button, the Orbi router will start the reboot procedure. It can take up to 2-3 minutes. The power light will initiate changing patterns. Usually, it will blink at different rates. It happens before you return to a steady glow and when the reset is done. 

6. Verify the Reset

Once the lights have stabilized, cross-check that your router is broadcasting the default network. Typically, the name (SSID) and default password for this network are printed on your router’s label or documentation. It confirms that the device has been successfully reset to its factory settings. 

7. Reconnect Devices

Now, you need to reconnect your device to the Orbi router with the use of the default credentials. Later on, access the network settings from the Wi-Fi options of your device. Next, you can easily enter the default SSID and password. 

8. Reconfigure the Router

In the next step, you have to log in to the web interface of your Orbi router or mobile app. It will be helpful to you in setting up your network from scratch. The steps are as follows –

• Web Interface Access: 

1. Open a web browser.
2. Type either your router’s web address http://orbilogin.com or its IP address http://192.168.1.1.
3. Next, enter the default username (admin) and password (password or as specified on the label).

• Set Up a New Password:

For end-to-end protection, bring changes to the default credentials to a specific username and password during the initial configuration. 

• Customize Network Settings:

Last but not least, name your Wi-Fi network ( SSID). Next, set a new password for easy recognition. It will be helpful to you in configuring a few more preferences such as – guest access, parental controls, or QoS (Quality of Service) settings.

9. Firmware Update

Verify if your Orbi router needs a firmware update. An outdated version can lead to connectivity issues or reduced performance. You have the option to upgrade your router’s firmware through –

• Web Interface:

Initially, navigate to the  “Firmware Update” section. Usually, it is under “Advanced Settings.” Later on, follow on-screen prompts.

• Orbi App:

Next, utilize the Orbi mobile app to kick-start the update. Make sure your router is connected to the internet during this step. 

10. Reconnect All Devices

This step is all about reconnecting all your devices to the newly configured network. For this, you need to choose your new SSID and enter the updated password. 

11. Test Connectivity

Now, it’s time to run a speed test. After that, you will be able to use connected devices. It will assist you to make sure that your router is functioning correctly. So, be sure that all areas where Wi-Fi is needed are receiving a strong signal. 

12. Secure the Setup

Finally, it’s time to make sure that the router is perfectly positioned in its original or optimal location. This way, you can ensure the best signal coverage. Try to keep it in an open space, elevated, and away from electronic devices that may cause several interruptions.

Additional Tips:

 If the above-given tips don’t help you reset Orbi router, you can try a few advanced steps mentioned in this section –

• Backup Settings:

Have you been completely satisfied with your configuration? If so, you can easily create a backup file of your current settings through the web interface. It helps you with future restoration easily. 

• Parental Control & Security Settings:

After that, you can easily set up parental controls and security protocols. These are – WPA3 and more.  This way, you can enhance your network security. 

• Monitor Status: 

With the regular checkup of the status of your Orbi router, you can do perfect monitoring. For this, you have to use its app or web interface. This way, you can optimize its performance and security updates as well. 

Bottom-line

Hopefully, the steps given above will be helpful to you to reset Orbi router. Now, you can make sure that your router is reset, set up, and functioning efficiently. As a result, the Orbi router will be ready to offer you credible Wi-Fi service. 

FAQs 

For more information visit on our website : Dolphin Techknology